home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Magnum One
/
Magnum One (Mid-American Digital) (Disc Manufacturing).iso
/
d21
/
qw12.exe
/
QWHITE12.EXE
/
TOSH5100.TEC
< prev
next >
Wrap
Text File
|
1990-10-08
|
2KB
|
36 lines
ID:TS Toshiba 5100 and QEMM-386
Quarterdeck Technical Note
by Stan Young
Q: How should I configure QEMM-386 or DESQview 386 to run on my
Toshiba 5100 (or 5200)?
QEMM-386 can be used as an expanded memory manager on the Toshiba 5100 or
5200, but may require some changes in the default configuration of the
Toshiba.
Under the default configuration, the Toshiba 5100 does not have any
extended memory, but actually has expanded memory hardware and an
expanded memory driver. If your Toshiba's memory is configured as
expanded, QEMM-386 will not see any extended memory to map and refuse to
load, or will not work properly.
To set the machine up properly, run the Toshiba Setup utility and
configure 640K of base memory and the rest of the memory as extended
memory. There should be no expanded memory configured.
Once the hardware has been set up so that all of the memory above 640K is
extended memory, edit the CONFIG.SYS file on the machine and remove the
expanded memory driver if one is being loaded. This file will probably
be called EMM.SYS or EMM386.SYS, but you may want to consult your Toshiba
manual to be sure.
After the expanded memory driver has been removed, you may run the QEMM-
386 Install program to install QEMM-386 and it should be able to operate
properly on the machine for DESQview and other programs that might
require EMS 4.0 memory.
Copyright (C) 1990 by Quarterdeck Office Systems
* * * E N D O F F I L E * * *